TV Cables for all your HDMI Cables, DVI Cables, Audio Cables, Video Cables, Speaker Cables, Computer Cables & Network Cables

Sas System 3 For

Hardware and Security - Drive Enclosures

2.5 Inch SATASAS HDDSSD Backplane Module

Supports direct connection of 2.5" SATA/SAS drives with 22/29 pins Supports SSDs and SATA/SAS hard drives of up to15mm in height Fits into a standard 3.5" expansion bay Dimensions are the same as a standard 3.5" hard drive so it can also be used with any 3.5" SATA backplane Features a 22 pin SATA interface for connecting to your system Hot swap support for quick and easy switching of drives

In Stock		Price: £14.99
SKU: 2.5-inch-satasas-hddssd-backplane-module-20979	Quantity:

Sas System 3 For

Hardware and Security - Hard Drive and RAID Controllers

8 port SASSATA 6Gbps Multilane Controller Low Profile Option PCIe x 8 x16

PCI-Express SAS / SATA 6Gbit/sec 8-port controller 8 x external SAS / SATA 6Gbit/sec ports via 2 x SFF-8088 connectors Supports SAS / SATA data transfer rates: 1.5 3 and 6Gbit/sec Compatible with the PCI Express Base Specification Rev. 2.0 Compatible with the Serial Attached SCSI - 2.0 (SAS 2.0) specification Compatible with the Serial ATA Specification Rev. 3.0 (SATA 3.0) Automatic detection of SAS or SATA drives Supports SAS Multiplexing Supports wide SAS Ports Supports NCQ (Native Command Queuing) Supports ATA and ATAPI commands support Compatable with PCI Express 2.0 x8 x16 slots Suitable for standard and low profile slot. Low profile bracket included Chipset: Marvell 9485 Operating Systems: Windows XP / Vista / 7 / Server 2003 2008 Note - No support for Port Multiplier

In Stock		Price: £199.99
SKU: 8-port-sassata-6gbps-multilane-controller-low-profile-option-pcie-x-8-x16-51138	Quantity:

Sas System 3 For

Hardware and Security - Drive Enclosures

Removable RAID Back Plane System for 3 SAS / SATA Drives

The SATA RAID Back Plane system is an internal drive housing that supports three SAS / SATA hard Drives. It can be installed into any suitable PC case or expansion system which has two 5.25Inch half-height drive bays available. The system is ideal for servers or workstations allowing instant hot-swap access to the hard drives. The Back Plane features a unique connection mechanism which allows the drives to be mounted directly into the back plane without the need for a separate caddy. A special 'no-scratch' connector protects the drive contacts and is tested to exceed over 10000 insertions and ejections. Allows up to three 3.5Inch SAS / SATA 1.0a or II hard drives to be installed into two standard 5.25Inch half-height drive bays Features 'caddy-less' drive ejection system Supports InchHot SwapInch function High quality aluminum housing for efficient cooling LED indicators for power and hard disk drive access Twin cooling fans External Connectors: 3 x SATA 7 pin primary data channel (black) 3 x SATA 7 pin secondary data channel (orange) 1 x 5.25Inch Power (for powering cooling fans) Dimensions: 145 x 85 x 200mm (WxDxH) Please note: hard drives not included. See our range of SAS / SATA RAID controllers.

In Stock		Price: £94.99
SKU: removable-raid-back-plane-system-for-3-sas-/-sata-drives-21974	Quantity:

Removable RAID Back Plane System for 5 SAS / SATA Drives

The SATA RAID Back Plane system is an internal drive housing that supports five SAS / SATA hard Drives. It can be installed into any suitable PC case or expansion system which has three 5.25Inch half-height drive bays available. The system is ideal for servers or workstations allowing instant hot-swap access to the hard drives. The Back Plane features a unique connection mechanism which allows the drives to be mounted directly into the back plane without the need for a separate caddy. A special 'no-scratch' connector protects the drive contacts and is tested to exceed over 10000 insertions and ejections. Allows up to five 3.5Inch SAS / SATA 1.0a or II hard drives to be installed into three standard 5.25Inch half-height drive bays Features 'caddy-less' drive ejection system Supports InchHot SwapInch function High quality aluminum housing for efficient cooling LED indicators for power and hard disk drive access Twin cooling fans External Connectors: 5 x SATA 7 pin primary data channel (black) + 5 x SATA 7 pin secondary data channel (orange) + 1 x 5.25Inch Power (for powering cooling fans) Dimensions: 145 x 85 x 200mm (WxDxH) Please note: hard drives not included. See our range of SAS / SATA RAID controllers.

In Stock		Price: £119.99
SKU: removable-raid-back-plane-system-for-5-sas-/-sata-drives-21975	Quantity:

Sas System 3 For

Hardware and Security - Drive Caddies and Raid

SAS / SATA II HDD Backplane Module

Supports 3.5 SAS / SATA II/1.0a drives of any capacity Fits into a standard 5.25 expansion bay Hard drive mounts directly into the back plane module without the need for a separate caddy Innovative hot-plug design allows extremely quick drive swaps minimizing down time Special 'No-Scratch' connector protects the hard drive contacts and is tested to exceed over 10000 insertions/ejections Sturdy metal frame with shock absorbing silicon rubber mounts to reduce noise and vibration Lockable drive eject handle with automatic drive release system A 3.5 HDD Wallet is also available for transporting bare drives

In Stock		Price: £34.99
SKU: sas-sata-ii-hdd-backplane-module-21970	Quantity:

Sas System 3 For

Hardware and Security - Adapters Converters

SAS/SATA Multilane Adapter Board for SATA Storage

This multilane adapter board can be used with an external drive enclosure to allow up to four SATA hard disks to be connected. A single multilane cable links the board to your host system. Mounted on a metal bracket the SCSI-I (50 Way Centronics) form factor makes it ideal for upgrading older drive enclosures to use new high speed SAS/SATA drives. Allows 4 SATA drives to be connected to 1 external multilane connector Supports transfer speeds of up to 6Gbps Metal bracket with mounting holes SCSI-I (50 Way Centronics) form factor External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 Year warranty Multilane Adapter Board for SATA Controllers also available. Click to see our range of SATA SAS and Multilane cables

In Stock		Price: £34.99
SKU: sas/sata-multilane-adapter-board-for-sata-storage-70552	Quantity:

SAS/SATA Multilane Host Adapter Board for SATA Controllers

This adapter board allows you to add an external multilane connector to a standard or low profile expansion slot in a PC or server. Converts 4 internal SATA ports to 1 external multilane connector Supports transfer speeds of up to 6Gbps Supplied with standard and low profile mounting brackets External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 Year warranty Multilane Bridge Board for SATA Storage is also available. Click to see our range of SATA SAS and Multilane cables.

In Stock		Price: £27.99
SKU: sas/sata-multilane-host-adapter-board-for-sata-controllers-70551	Quantity:

Sas System 3 For

Hardware and Security - Drive Enclosures

SASSATA Back Plane System for 4 x 2.5 Inch Hard Drives

The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system and is ideal for servers and workstations alike allowing instant hot-swap access to the hard drives. To add RAID functionality simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs and requires less cooling - so is quieter to run. Supports 4 x 2.5" SAS and SATA II/1.0a HDDs (not included) Supports 9.5mm or 12.5mm height HDDs Dip switch to set LED and spin up behaviour between: LED flickering for HDD access and staggered HDD spin up No LED flickering for HDD access and HDD spin up on power Fits into a standard 5.25" expansion bay RAID compatible when connected to a suitable RAID controller Supports hot swap function 2 year warranty

In Stock		Price: £74.99
SKU: sassata-back-plane-system-for-4-x-2.5-inch-hard-drives-21981	Quantity:

SASSATA Back Plane System for 6 x 2.5 Inch Hard Drives

The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to six 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system and is ideal for servers and workstations alike allowing instant hot-swap access to the hard drives. To add RAID functionality simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs and requires less cooling - so is quieter to run. Supports 6 x 2.5" SAS and SATA II/1.0a HDDs (not included) Supports 9.5mm height HDDs Dip switch to set LED and spin up behaviour between: LED flickering for HDD access and staggered HDD spin up No LED flickering for HDD access and HDD spin up on power Fits into a standard 5.25" expansion bay RAID compatible when connected to a suitable RAID controller Supports hot swap function 2 year warranty