|
|
|
|
|
Simultaneously connect two RS-232 serial devices to your USB ready PC or Mac.
- Supports all standard serial devices
- USB 1.1 Compliant
- Easy plug and play installation
- Connectors: 2 x 9 Way D Male to USB A Male
- Supports remote wake up and power management
- Data buffers for upstream and downstream on each port
- Powered from USB Bus with no external power supply required
- Cable length: 60cm
- Compatible with Windows ME/2000/XP/Vista/7 and Mac OS 9 or higher
- Warranty: 2 years
|
|
|
|
|
|
This USB to Serial Converter allows you to connect up to 4 serial devices to a single USB port. The compact size and USB bus-powered design make it ideal for use with notebooks or as an alternative to installing an internal serial card in your desktop PC. It supports most standard RS-232 serial devices such as modems, PDAs, barcode readers, label printers, EPOS devices etc.
- USB 1.1 interface
- Provides 4 separate RS-232 serial ports (4 x 9 Way D Male)
- Easy Plug & Play installation
- Reset button for device detection
- Powered from the USB bus - no separate power supply required for most installations (an optional power supply is available for use with serial devices which require extra power)
- Chipset: FTDI
- Supplied with 80cm USB Type A to B connection cable
- Compatible with Windows 98SE/ME/2000/XP/Vista/7, Mac OS 8.6 and above
|
|
|
|
|
|
The LINDY USB to Serial Converter allows any USB ready computer to utilise the 9-Way serial RS-422 port for use with serial devices such as industrial control equipment.
- Provides connection for RS422 devices via any available USB port
- Fully compliant with USB Specification 1.1, USB 2.0 compatible
- Provides one 9 Way Male Serial Port for device connection
- Supports data transfer rates of up to 3 Mbps
- Supports Remote Wake-Up and Power Management
- Supports Hot-Swapping so you can quickly switch serial devices without shutting down your computer
- USB bus powered
- USB cable length appr. 1m
- Compatible with Windows ME/2000/XP/Vista/7, Mac OS 9 and higher, Linux
|
|
|
|
|
|
The LINDY USB to Serial Converter allows any USB ready computer to utilise the 9-Way serial RS-485 port for use with serial devices such as EPOS equipment.
- Provides connection for RS-485 devices via any available USB port
- Fully compliant with USB specification 1.1, USB 2.0 compatible
- Provides one 9 Way Male serial port for device connection
- Supports data transfer rate of up to 3Mbps
- Supports Remote Wake-Up and Power Management
- Supports Hot-Swapping so you can quickly switch serial devices without shutting down your computer
- USB bus powered
- USB cable length approx. 1m
- Compatible with Windows ME/2000/XP/Vista/7, Mac OS 9 and higher, Linux
- 2 year warranty
|
|
|
|
|
|
This USB to Serial Converter allows any modern USB equipped computer to connect to devices equipped with 25 Way serial RS-232 ports. Ideal for EPOS, process control, lab equipment etc.
- Supports all standard serial devices
- USB 1.1 compliant
- "Plug & Play"
- Connectors: 25 Way D Male to USB A Male Adaptor
- No IRQ, I/O address or DMA memory address needed
- Powered from USB Bus with no external power supply required
- Cable length: 1.5m
- Compatible with Windows 95(OSR2.1)98/ME/2000/XP/Vista/7 and Mac OS 8.6 and above
- 2 year warranty
|
|
First <-- Previous Next --> Last
|
