F type 90 degree right angle adapter.
2 Way Manual HDMI Switch
High quality dummy camera in outdoor housing with fake IR LED. Professional design for the impression of security. Built in battery powered flashing LED. Mounting bracket included.
Power, requires 2x AA batteries, not included.
Supplied with mount, screws and plugs.
Professional looking camera with a deterring effect. Fitted with a continuously flashing LED indicator and fake IR LEDs in a weatherproof plastic housing. Can be mounted on any surface with the included adjustable bracket.
Optical to Phono Audio Converter, Converts TOSlink optical or digital coaxial to 2x Phono RCA Analogue
This digital to analogue audio converter is designed for either home or professional audio use. It converts Digital Coaxial or TOSLINK Optical digital audio signals in to analogue L/R audio for connection to an external device such as an amplifier via standard phono RCA jacks. This converter is small in size and easy to install.
Converts Coaxial or TOSLINK digital audio signals to analogue L/R audio
Easy to install and simple to operate
Input : TOSLINK optical or Coaxial Phono / RCA
Output : Phono / RCA left/right
Supports sampling rate at 32, 44.1, 48 and 96 KHz
24-bit S/PDIF incoming bit stream on left and right channels
Power supply : 5V DC 2A
Power consumption : 0.5watts
Digital to Analogue Converter
Screen not included.
Please note this bracket is now white not silver.
Power supply, mounting pole, brackets with fixings and 10m aerial lead.
Power supply, 5 F plugs, 4 weather boots, 1m fly lead, mounting pole and brackets with fixings.
HDMI Audio Extractor
A device that allows you to extract audio signals from your HDMI source. When connecting with a TV or display you don't always get great audio, or in the case of a display, no audio at all, so with this Audio Extractor you can take your original HDMI audio signal and convert it to Digital Toslink or analogue L/R audio.
2x8 HDMI Splitter Switch, 2 Input, 8 Output.
15 Selectable EDID modes for best TV compatibility.
4 way HDMI over CAT5 splitter, 4 CAT5/CAT6 RJ45 UTP output ports and 4 receivers.
The 4 Room HDMI over CAT5 kit is the ideal solution for sending an HDMI signal to 4 rooms in a house or office. The CAT5 splitter accepts an HDMI input and provides four network socket (RJ45) outputs, these connect via a single CAT5e or CAT6 network lead to the supplied receiver units. The receiver units then connect to the TV via an HDMI lead.
If using with a SkyHD system we recommend using magic eyes over coax for remote control, alternatively you can now use a tablet or smartphone app over wifi.
Full details of the kit can be found in the pdf manual here
We Also Accept
Designed & Maintained by Nimbus Designs Ltd