HDMI Over Ethernet with IR Remote Control Extender.
How many network cables are required?
2 network cables are required.
WIll these work with Homeplug powerline adapters?
No they need 2 dedicated ethernet cables.
Will I lose any video or sound quality?
No the picture and sound will be the same as using an HDMI cable.
Do I have to connect the power supply?
It is recommended to connect the power supply for best performance.
*See terms and conditions for details
8 way HDMI over CAT5 splitter, 8 CAT5/CAT6 RJ45 UTP output ports and 8 receivers... ... Read More
8 way HDMI over CAT5 splitter, 8 CAT5/CAT6 RJ45 UTP output ports and 8 receivers. Splits an HDMI signal to 8 remote screens via CAT5 or CAT6 network cable. FEATURES: Distributes 1 input HDMI signal to 8 identical UTP RJ45 outputs for transmission over a single CAT5e/CAT6 network cable 8 HDMI over CAT5 receivers supplied. Supports 1080p up to 30m using CAT6 shielded cable Supports deep colour 8 bits per channel, 24 bits total. 5V 2A power supplies included in kit. Simple plug and play, no settings required. Sender dimensions: 270 x 40 x 182mm Receiver dimensions: 65 x 25 x 100mm Kit includes 1x Sender splitter, 8x receivers, power adapters and user manual. We recommend using the following network cables with this unit:- CAT6 Shielded Network Cables CAT6A Shielded Network CablesRead Less
Send Sky HD, Virgin Media or any HDMI source to another room with remote control... ... Read More
Send Sky HD, Virgin Media or any HDMI source to another room with remote control up to 120m away using a single CAT5 or CAT6 network cable. Supports 1080p 50/60Hz 120m range using CAT6 cable, 100m using CAT5e or 80m with CAT5 Local HDMI output for connection to TV, no need to use an HDMI splitter. HDCP compliant. Supports IR remote control over HDMI, sensors supplied. Upto 5m HDMI cable can be used each end. Package includes HDMI Sender HDMI Receiver IR Sender IR Receiver 2x Power Supplies Example setup for Sky HD or Virgin Media Connect an HDMI cable from your Sky HD/Virgin box to the sender unit input. Connect an HDMI cable from the HDMI output of the sender to the local TV Connect a network cable up to 120m long between the send and receive units Connect an HDMI cable from the receive unit to the remote TV Plug in the power supplies and switch on. You can now enjoy HDTV on both TVs with remote control.Read Less
Our Price: £183.74
Our Price: £38.18
Our Price: £360.00
Our Price: £94.30
Registered in England No 1521727
Registered Office: 42 High Street, Flitwick, Beds, MK45 1DU
Tel 0207 100 4874
Parcels and Visitors are NOT accepted at this address.
© Copyright 1980-2021 TVCables All rights reserved.