25m Blue Ethernet Cables

Our range of 25m blue ethernet cables is ideal for use in a home or office network. Each cable has an RJ45 network connector each end to plug into your router, network switch or connected device such as set top boxes and smart TVs.
25m Ethernet Cable CAT5e Full Copper Blue

£5.65 inc VAT
273 In Stock

25m ethernet cable, CAT5e, blue, full copper cable, 4 pair design, ideal for use in home or office n...

Ideal for home or office network connections 25 Metre Ethernet Cable Colour blue UTP (Unshielded Twisted Pair) CAT5e 100MHz Moulded Connectors 26AWG 4 Pair ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P Full copper cable RJ45 Male to male Category 5e cable is a twisted pair high signal integrity data cable type often referred commonly known as CAT5e. Most cables are unshielded, relying on the twisted pair design for noise rejection. Ideal for use in home or office environments in computer networks such as Ethernet or to connect TVs and devices to routers
Read Less

CAT6A Ethernet Cable 25m Blue

£16.04 inc VAT
80 In Stock

CAT6A Patch Cable Blue, 10GBase-T, 26AWG, 600MHz, S/FTP, 25 Metre

CAT6A Ethernet Cable 25m Blue 10GBase-T Pure Copper Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6, Cat5e and Cat5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second). S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2 IEC 60332-1-2, RoHS Compliant and 3P Verified
Read Less